Hunting Camo Gear Bow Camo. http://www.huntingcamogear.com/ Thu, 24 May 2012 00:32:42 -0500 en This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to Military BDU trousers. These are made by Propper. The Jute thread is sewn on to the back of the trousers and a 1000 Denier Cordura Plus Material is sewn on to the front for those long sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency (Weight 3.5 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2357/pants_sniper_leafy_green_2xl_ghillie.html http://www.huntingcamogear.com/images/products/pants sniper Leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2357/pants_sniper_leafy_green_2xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to Military BDU trousers. These are made by Propper. The Jute thread is sewn on to the back of the trousers and a 1000 Denier Cordura Plus Material is sewn on to the front for those long sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency (Weight 3.5 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2356/pants_sniper_desert_3xl_ghillie.html http://www.huntingcamogear.com/images/products/pants sniper Desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2356/pants_sniper_desert_3xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to Military BDU trousers. These are made by Propper. The Jute thread is sewn on to the back of the trousers and a 1000 Denier Cordura Plus Material is sewn on to the front for those long sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency (Weight 3.5 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2355/pants_sniper_desert_2xl_ghillie.html http://www.huntingcamogear.com/images/products/pants sniper Desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2355/pants_sniper_desert_2xl_ghillie.html This suit is pre-treated with a Class "A" fire-retardant Our same High Quality Jute Thread is sewn directly on to Military BDU trousers. These are made by "Propper". The Jute thread is sewn on to the back of the trousers and a 1000 Denier Cordura Plus Material is sewn on to the front for those long sniper crawls. The Cordura "Plus" means it has a Urethane Coating for water repellency (Weight 3.5 lbs). If "Propper" brand is unavailable at the time, we will use "Tru-Spec" Brand. Multiple patterns and sizes available. Mossy shown in main photo. SS Small-Short SR Small-Regular SL Small-Long BDU PANTS - Waist 27-31 27-31 27-31 BDU PANTS - Inseam 26 1/2-29 1/2 29 1/2-32 1/2 32 1/2-35 1/2 BDU COAT - Chest 33-37 33-37 33-37 BDU COAT - Height 63-67 67-71 71-75 -------------------------------------------------------------------------------- MS Medium-Short MR Medium-Regular ML Medium-Long BDU PANTS - Waist 31-35 31-35 31-35 BDU PANTS - Inseam 26 1/2-29 1/2 29 1/2-32 1/2 32 1/2-35 1/2 BDU COAT - Chest 37-41 37-41 37-41 BDU COAT - Height 63-67 67-71 71-75 -------------------------------------------------------------------------------- LS Large-Short LR Large-Regular LL Large-Long BDU PANTS - Waist 35-39 35-39 35-39 BDU PANTS - Inseam 26 1/2-29 1/2 29 1/2-32 1/2 32 1/2-35 1/2 BDU COAT - Chest 41-45 41-45 41-45 BDU COAT - Height 63-67 67-71 71-75 -------------------------------------------------------------------------------- XLR Extra Large-Regular XLL Extra Large-Long BDU PANTS - Waist 39-43 39-43 BDU PANTS - Inseam 29 1/2-32 1/2 32 1/2-35 1/2 BDU COAT - Chest 45-49 45-49 BDU COAT - Height 67-71 71-75 -------------------------------------------------------------------------------- XXLR 2X Large-Regular XXLL 2X Large-Long XXXLL 3X Large-Long BDU PANTS - Waist 43-47 43-47 47-51 BDU PANTS - Inseam 29 1/2-32 1/2 32 1/2-35 1/2 29 1/2-32 1/2 BDU COAT - Chest 49-53 49-53 53-57 BDU COAT - Height 67-71 71-75 67-71 -------------------------------------------------------------------------------- http://www.huntingcamogear.com/content-product_info/product_id-2353/pants_sniper_ghillie.html http://www.huntingcamogear.com/images/products/pants sniper.jpg http://www.huntingcamogear.com/content-product_info/product_id-2353/pants_sniper_ghillie.html Next Generation Lightweight Camouflage Complete Paintball Ghillie Suit Kit! Kit includes the following: One 5' x 9' nylon netting. Seven colors of Next Generation Synthetic thread. (3.5 lbs. total) Complete directions on how to assemble kit into a lightweight Camouflage Ghillie Poncho. Synthetic thread colors include : Brown, Black, Gray, Light Green, Olive Green, Tan & Dark Green. Synthetic thread is the Next Generation in Building a lightweight Camouflage Ghillie suit, because Synthetic thread is: Water-proof Rot-proof Mildew resistant Fire-retardant Washable Odor-less Non-Allergenic Using the supplied directions, you can build a Mossy colored suit, Woodland, or use all seven colors for an All-Season suit. You can even use the materials to build a ground blind, blanket, or any other concealment device. Use your imagination, your options are endless. Completed suit uses only 2.75 lbs. of the Synthetic colored thread! With the supplied extra materials, you can always change colors to match your terrain. http://www.huntingcamogear.com/content-product_info/product_id-2352/paintball_ultra_light_kit_ghillie.html http://www.huntingcamogear.com/images/products/kit lt wt.jpg http://www.huntingcamogear.com/content-product_info/product_id-2352/paintball_ultra_light_kit_ghillie.html NEW - Synthetic Tracker kit Build your own Tracker . Our Tracker Ghillie kit comes complete with everything you need to build our Famous Tracker Ghillie Suit! You get 4 bundles of pre-cut, and dyed Synthetic thread, a 5'x4' nylon net with 1 x1 squares, and color directions on how to assemble. We offer these kits in the same colors as we do our pre-made suits. Kits take about 5 hours to complete. Synthetic thread is Light weight Fire-retardant Water-repellant Rot proof Mildew resistant Non allergenic NO UV Brighteners WOODLAND - Brown, Black, Dark Green, Forrest Green http://www.huntingcamogear.com/content-product_info/product_id-2301/paintball_custom_tracker_camo_kit_woodland_gillie.html http://www.huntingcamogear.com/images/products/tracker woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2301/paintball_custom_tracker_camo_kit_woodland_gillie.html NEW - Synthetic Tracker kit Build your own Tracker . Our Tracker Ghillie kit comes complete with everything you need to build our Famous Tracker Ghillie Suit! You get 4 bundles of pre-cut, and dyed Synthetic thread, a 5'x4' nylon net with 1 x1 squares, and color directions on how to assemble. We offer these kits in the same colors as we do our pre-made suits. Kits take about 5 hours to complete. Synthetic thread is Light weight Fire-retardant Water-repellant Rot proof Mildew resistant Non allergenic NO UV Brighteners MOSSY - Brown, Gray, Tan, Dark Green http://www.huntingcamogear.com/content-product_info/product_id-2300/paintball_custom_tracker_camo_kit_mossy_gillie.html http://www.huntingcamogear.com/images/products/tracker mossy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2300/paintball_custom_tracker_camo_kit_mossy_gillie.html NEW - Synthetic Tracker kit Build your own Tracker . Our Tracker Ghillie kit comes complete with everything you need to build our Famous Tracker Ghillie Suit! You get 4 bundles of pre-cut, and dyed Synthetic thread, a 5'x4' nylon net with 1 x1 squares, and color directions on how to assemble. We offer these kits in the same colors as we do our pre-made suits. Kits take about 5 hours to complete. Synthetic thread is Light weight Fire-retardant Water-repellant Rot proof Mildew resistant Non allergenic NO UV Brighteners DESERT - Tan, Tan, Tan, Brown http://www.huntingcamogear.com/content-product_info/product_id-2298/paintball_custom_tracker_camo_kit_desert_gillie.html http://www.huntingcamogear.com/images/products/tracker desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2298/paintball_custom_tracker_camo_kit_desert_gillie.html Custom Tracker kit - with Synthetic thread! You choose the colors - Our full custom Tracker kit comes complete with everything you need to build our Famous Ghillie Tracker! Each kit gets 4 Bundles of pre-cut and dyed Synthetic thread, a 5'x4' nylon net with 1 x1 in squares, and color directions on how to assemble. But best of all, You decide on the colors! Choose from any of our 7 different colors. We also offer these kits in 4 of the most popular color combinations just like our pre-made suits. Kits take about 5 hours to complete New Synthetic thread is light weight (Suit will weigh 2 lbs.) Fire-retardant Water-repellant Rot proof Mildew resistant Non allergenic NO UV Brighteners http://www.huntingcamogear.com/content-product_info/product_id-2297/paintball_custom_tracker_camo_kit_gillie.html http://www.huntingcamogear.com/images/products/kit tracker.jpg http://www.huntingcamogear.com/content-product_info/product_id-2297/paintball_custom_tracker_camo_kit_gillie.html NEW - Synthetic Tracker kit Build your own Tracker . Our Tracker Ghillie kit comes complete with everything you need to build our Famous Tracker Ghillie Suit! You get 4 bundles of pre-cut, and dyed Synthetic thread, a 5'x4' nylon net with 1 x1 squares, and color directions on how to assemble. We offer these kits in the same colors as we do our pre-made suits. Kits take about 5 hours to complete. Synthetic thread is Light weight Fire-retardant Water-repellant Rot proof Mildew resistant Non allergenic NO UV Brighteners LEAFY GREEN - Forrest Green, Forrest Green, Dark Green, Light Olive http://www.huntingcamogear.com/content-product_info/product_id-2299/paintball_custom_camo_kit_leafy_green_gillie.html http://www.huntingcamogear.com/images/products/tracker leafy green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2299/paintball_custom_camo_kit_leafy_green_gillie.html Lightweight Camouflage Complete Ghillie Suit Kit! You Pick The Colors! Choose any Combination of colors to match your area! Kit includes the following One 5' x 9' nylon netting. Complete directions on how to assemble kit into a lightweight Camouflage Ghillie Poncho. Synthetic thread color Options : Brown, Black, Gray, Light Olive, Forest Green, Tan & Dark Green. Synthetic thread is the Next Generation in Building a lightweight Camouflage Ghillie suit, because Synthetic thread is: Water-proof Rot-proof Mildew resistant Fire-retardant Washable Odor-less Non-Allergenic Using the supplied directions, you can build a Mossy colored suit, Woodland, or use all seven colors for an All-Season suit. You can even use the materials to build a ground blind, blanket, or any other concealment device. Use your imagination, your options are endless. Your Completed suit uses only 2.75 lbs. of the Synthetic colored thread! With the supplied extra materials, you can always change colors to match your terrain. http://www.huntingcamogear.com/content-product_info/product_id-2296/paintball_custom_camo_kit_gillie.html http://www.huntingcamogear.com/images/products/kit complete.jpg http://www.huntingcamogear.com/content-product_info/product_id-2296/paintball_custom_camo_kit_gillie.html Lightweight Camouflage Complete Ghillie Suit Kit! Kit includes the following Seven colors of Next Generation Synthetic thread. (3.5 lbs. total) Complete directions on how to assemble kit into a lightweight Camouflage Ghillie Poncho. Synthetic thread colors include : Brown, Brown, Tan, Gray, Gray, & Dark Green. Synthetic thread is the Next Generation in Building a lightweight Camouflage Ghillie suit, because Synthetic thread is: Water-proof Rot-proof Mildew resistant Fire-retardant Washable Odor-less Non-Allergenic Using the supplied directions, you can build a Mossy colored suit, Woodland, or use all seven colors for an All-Season suit. You can even use the materials to build a ground blind, blanket, or any other concealment device. Use your imagination, your options are endless. Your Completed suit uses only 2.75 lbs. of the Synthetic colored thread! With the supplied extra materials, you can always change colors to match your terrain. http://www.huntingcamogear.com/content-product_info/product_id-2291/paintball_camo_kit_synthetic_thread_mossy_ghillie.html http://www.huntingcamogear.com/images/products/kit mossy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2291/paintball_camo_kit_synthetic_thread_mossy_ghillie.html Lightweight Camouflage Complete Ghillie Suit Kit! Kit includes the following Seven colors of Next Generation Synthetic thread. (3.5 lbs. total) Complete directions on how to assemble kit into a lightweight Camouflage Ghillie Poncho. Synthetic thread colors include : Brown, Black, Gray, Light Green, Olive Green, Tan & Dark Green. Synthetic thread is the Next Generation in Building a lightweight Camouflage Ghillie suit, because Synthetic thread is: Water-proof Rot-proof Mildew resistant Fire-retardant Washable Odor-less Non-Allergenic Using the supplied directions, you can build a Mossy colored suit, Woodland, or use all seven colors for an All-Season suit. You can even use the materials to build a ground blind, blanket, or any other concealment device. Use your imagination, your options are endless. Your Completed suit uses only 2.75 lbs. of the Synthetic colored thread! With the supplied extra materials, you can always change colors to match your terrain. http://www.huntingcamogear.com/content-product_info/product_id-2290/paintball_camo_kit_synthetic_thread_mil_sniper_ghillie.html http://www.huntingcamogear.com/images/products/kit mil.jpg http://www.huntingcamogear.com/content-product_info/product_id-2290/paintball_camo_kit_synthetic_thread_mil_sniper_ghillie.html Lightweight Camouflage Complete Ghillie Suit Kit! Kit includes the following Seven colors of Next Generation Synthetic thread. (3.5 lbs. total) Complete directions on how to assemble kit into a lightweight Camouflage Ghillie Poncho. Synthetic thread colors include : Forrest Green, Forrest Green, Forrest Green, Forrest Green, Light Olive, & Dark Green. Synthetic thread is the Next Generation in Building a lightweight Camouflage Ghillie suit, because Synthetic thread is: Water-proof Rot-proof Mildew resistant Fire-retardant Washable Odor-less Non-Allergenic Using the supplied directions, you can build a Mossy colored suit, Woodland, or use all seven colors for an All-Season suit. You can even use the materials to build a ground blind, blanket, or any other concealment device. Use your imagination, your options are endless. Your Completed suit uses only 2.75 lbs. of the Synthetic colored thread! With the supplied extra materials, you can always change colors to match your terrain. http://www.huntingcamogear.com/content-product_info/product_id-2289/paintball_camo_kit_synthetic_thread_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/kit Leafy green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2289/paintball_camo_kit_synthetic_thread_leafy_green_ghillie.html DescriptionDetailsPicturesPurchaseGhillie Suit Jacket Desert XL Model: G-BDU-J-Desert-XL SKU: DSD461104 MSRP: $192.00 Reseller Cost: $128.64 MAP Pricing? No # in Stock: 75 This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand http://www.huntingcamogear.com/content-product_info/product_id-2094/suit_jacket_desert_xl.html http://www.huntingcamogear.com/images/products/product_thumbCAL467QH.jpg http://www.huntingcamogear.com/content-product_info/product_id-2094/suit_jacket_desert_xl.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2395/jacket_synthetic_ultra_light_s_xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/jac woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2395/jacket_synthetic_ultra_light_s_xl_woodland_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2392/jacket_synthetic_ultra_light_s_xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac leafy green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2392/jacket_synthetic_ultra_light_s_xl_leafy_green_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2390/jacket_synthetic_ultra_light_s_xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2390/jacket_synthetic_ultra_light_s_xl_desert_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2394/jacket_synthetic_ultra_light_2_3xl_woodland_oak_ghillie.html http://www.huntingcamogear.com/images/products/jac woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2394/jacket_synthetic_ultra_light_2_3xl_woodland_oak_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to Military BDU pants. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the pants. The front of the pants have a 1000 Denier Cordura Plus sewn on. The Plus means it has a urethane coating making it water proof for laying down for extended periods. The 1000 Denier is very abrasive resistant, so you can crawl over rocks and sticks with ease. Top front and rear pockets are accessible. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight of Medium Large pants - 2 lbs. Boxed Weight 3 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2391/jacket_synthetic_ultra_light_2_3xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac leafy green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2391/jacket_synthetic_ultra_light_2_3xl_leafy_green_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2389/jacket_synthetic_ultra_light_2_3xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2389/jacket_synthetic_ultra_light_2_3xl_desert_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2425/jacket_synthetic_ultra_light_2_3xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2425/jacket_synthetic_ultra_light_2_3xl_woodland_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2424/jacket_synthetic_ultra_light_2_3xl_mossy_oak_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Mossy Oak.jpg http://www.huntingcamogear.com/content-product_info/product_id-2424/jacket_synthetic_ultra_light_2_3xl_mossy_oak_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2421/jacket_synthetic_ultra_light_2_3xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Leaft Green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2421/jacket_synthetic_ultra_light_2_3xl_leafy_green_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2419/jacket_synthetic_ultra_light_2_3xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2419/jacket_synthetic_ultra_light_2_3xl_desert_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2335/jacket_suit_woodland_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/jac wl.jpg http://www.huntingcamogear.com/content-product_info/product_id-2335/jacket_suit_woodland_s_xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2337/jacket_suit_woodland_3_4xl_ghillie.html http://www.huntingcamogear.com/images/products/jac wl.jpg http://www.huntingcamogear.com/content-product_info/product_id-2337/jacket_suit_woodland_3_4xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2336/jacket_suit_woodland_2xl_ghillie.html http://www.huntingcamogear.com/images/products/jac wl.jpg http://www.huntingcamogear.com/content-product_info/product_id-2336/jacket_suit_woodland_2xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2330/jacket_suit_leafy_green_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/jac leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2330/jacket_suit_leafy_green_s_xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2331/jacket_suit_leafy_green_2xl_ghillie.html http://www.huntingcamogear.com/images/products/jac leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2331/jacket_suit_leafy_green_2xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2327/jacket_suit_desert_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/JAC DESERT.jpg http://www.huntingcamogear.com/content-product_info/product_id-2327/jacket_suit_desert_s_xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2329/jacket_suit_desert_3xl_4xl_ghillie.html http://www.huntingcamogear.com/images/products/JAC DESERT 3 & 4XL.jpg http://www.huntingcamogear.com/content-product_info/product_id-2329/jacket_suit_desert_3xl_4xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2328/jacket_suit_desert_2xl_ghillie.html http://www.huntingcamogear.com/images/products/jac desert xxl.jpg http://www.huntingcamogear.com/content-product_info/product_id-2328/jacket_suit_desert_2xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2426/jacket_sniper_synthetic_ultra_light_s_xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2426/jacket_sniper_synthetic_ultra_light_s_xl_woodland_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2423/jacket_sniper_synthetic_ultra_light_s_xl_mossy_oak_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Mossy Oak.jpg http://www.huntingcamogear.com/content-product_info/product_id-2423/jacket_sniper_synthetic_ultra_light_s_xl_mossy_oak_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2422/jacket_sniper_synthetic_ultra_light_s_xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Leaft Green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2422/jacket_sniper_synthetic_ultra_light_s_xl_leafy_green_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2420/jacket_sniper_synthetic_ultra_light_s_xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2420/jacket_sniper_synthetic_ultra_light_s_xl_desert_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2376/jacket_sniper_suit_s_xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/JAC sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2376/jacket_sniper_suit_s_xl_woodland_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2373/jacket_sniper_suit_s_xl_mossey_oak_ghillie.html http://www.huntingcamogear.com/images/products/JC sniper Mossey.jpg http://www.huntingcamogear.com/content-product_info/product_id-2373/jacket_sniper_suit_s_xl_mossey_oak_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2370/jacket_sniper_suit_s_xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2370/jacket_sniper_suit_s_xl_leafy_green_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2367/jacket_sniper_suit_s_xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2367/jacket_sniper_suit_s_xl_desert_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2378/jacket_sniper_suit_3xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/JAC sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2378/jacket_sniper_suit_3xl_woodland_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Bran http://www.huntingcamogear.com/content-product_info/product_id-2375/jacket_sniper_suit_3xl_mossey_oad_ghillie.html http://www.huntingcamogear.com/images/products/JC sniper Mossey.jpg http://www.huntingcamogear.com/content-product_info/product_id-2375/jacket_sniper_suit_3xl_mossey_oad_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2372/jacket_sniper_suit_3xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2372/jacket_sniper_suit_3xl_leafy_green_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2369/jacket_sniper_suit_3xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2369/jacket_sniper_suit_3xl_desert_ghillie.html DescriptionDetailsPicturesPurchaseSniper Ghillie Suit Jacket Woodland XXL Model: S-BDU-J-Woodland-XXL SKU: DSD461061 MSRP: $210.00 Reseller Cost: $140.70 MAP Pricing? No # in Stock: 75 This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2377/jacket_sniper_suit_2xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/JAC sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2377/jacket_sniper_suit_2xl_woodland_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2374/jacket_sniper_suit_2xl_mossey_oak_ghillie.html http://www.huntingcamogear.com/images/products/JC sniper Mossey.jpg http://www.huntingcamogear.com/content-product_info/product_id-2374/jacket_sniper_suit_2xl_mossey_oak_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2371/jacket_sniper_suit_2xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2371/jacket_sniper_suit_2xl_leafy_green_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2368/jacket_sniper_suit_2xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2368/jacket_sniper_suit_2xl_desert_ghillie.html This suit is pre-treated with a Class "A" fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by "Propper". The sewn on Jute thread covers the entire Back of the jacket, tops of the arms, and shoulders. The Hood is attached, and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura "Plus" means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1"x1" netting, finally sewing this to the Jacket. This design keeps you cooler, allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed, and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If "Propper" brand is unavailable at the time, we will use "Tru-Spec" Brand. Multiple patterns and sizes available. Woodland pattern shown in main photo. SS Small-Short SR Small-Regular SL Small-Long BDU PANTS - Waist 27-31 27-31 27-31 BDU PANTS - Inseam 26 1/2-29 1/2 29 1/2-32 1/2 32 1/2-35 1/2 BDU COAT - Chest 33-37 33-37 33-37 BDU COAT - Height 63-67 67-71 71-75 -------------------------------------------------------------------------------- MS Medium-Short MR Medium-Regular ML Medium-Long BDU PANTS - Waist 31-35 31-35 31-35 BDU PANTS - Inseam 26 1/2-29 1/2 29 1/2-32 1/2 32 1/2-35 1/2 BDU COAT - Chest 37-41 37-41 37-41 BDU COAT - Height 63-67 67-71 71-75 -------------------------------------------------------------------------------- http://www.huntingcamogear.com/content-product_info/product_id-2366/jacket_sniper_suit_ghillie.html http://www.huntingcamogear.com/images/products/JAC DESERT.jpg http://www.huntingcamogear.com/content-product_info/product_id-2366/jacket_sniper_suit_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2334/138_69.html http://www.huntingcamogear.com/images/products/jck leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2334/138_69.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2418/jacket_bow_hunting_ultra_light_right_hand_woodland_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc R woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2418/jacket_bow_hunting_ultra_light_right_hand_woodland_s_xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2417/jacket_bow_hunting_ultra_light_right_hand_woodland_2_3xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc R woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2417/jacket_bow_hunting_ultra_light_right_hand_woodland_2_3xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2416/jacket_bow_hunting_ultra_light_right_hand_mossy_oak_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc R Mossy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2416/jacket_bow_hunting_ultra_light_right_hand_mossy_oak_s_xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2415/jacket_bow_hunting_ultra_light_right_hand_mossy_oak_2_3xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc R Mossy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2415/jacket_bow_hunting_ultra_light_right_hand_mossy_oak_2_3xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2414/jacket_bow_hunting_ultra_light_right_hand_leafy_green_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc R leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2414/jacket_bow_hunting_ultra_light_right_hand_leafy_green_s_xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2413/jacket_bow_hunting_ultra_light_right_hand_leafy_green_2_3xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc R leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2413/jacket_bow_hunting_ultra_light_right_hand_leafy_green_2_3xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2412/jacket_bow_hunting_ultra_light_right_hand_desert_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc R desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2412/jacket_bow_hunting_ultra_light_right_hand_desert_s_xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2411/jacket_bow_hunting_ultra_light_right_hand_desert_2_3xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc R desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2411/jacket_bow_hunting_ultra_light_right_hand_desert_2_3xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2410/jacket_bow_hunting_ultra_light_left_hand_woodland_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2410/jacket_bow_hunting_ultra_light_left_hand_woodland_s_xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2409/jacket_bow_hunting_ultra_light_left_hand_woodland_2_3xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2409/jacket_bow_hunting_ultra_light_left_hand_woodland_2_3xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2408/jacket_bow_hunting_ultra_light_left_hand_mossy_oak_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc Mossy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2408/jacket_bow_hunting_ultra_light_left_hand_mossy_oak_s_xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2407/jacket_bow_hunting_ultra_light_left_hand_mossy_oak_2_3xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc Mossy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2407/jacket_bow_hunting_ultra_light_left_hand_mossy_oak_2_3xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2406/jacket_bow_hunting_ultra_light_left_hand_leafy_green_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2406/jacket_bow_hunting_ultra_light_left_hand_leafy_green_s_xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2405/jacket_bow_hunting_ultra_light_left_hand_leafy_green_2_3xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2405/jacket_bow_hunting_ultra_light_left_hand_leafy_green_2_3xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2404/jacket_bow_hunting_ultra_light_left_hand_desert_s_l_ghillie.html http://www.huntingcamogear.com/images/products/bow jc desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2404/jacket_bow_hunting_ultra_light_left_hand_desert_s_l_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These jackets are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket, half the chest area in the front, one sleeve, and has an attached hood. The open sleeve and chest area is so your bow string won't interfere with your bow shot. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2403/jacket_bow_hunting_ultra_light_left_hand_desert_2_3_xl_ghillie.html http://www.huntingcamogear.com/images/products/bow jc desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2403/jacket_bow_hunting_ultra_light_left_hand_desert_2_3_xl_ghillie.html