Hunting Camo Gear offers a wide variety of camouflage clothing, ghillie suits and tactical gear for hunting, archery, and paintball. Shop securely, at low prices. http://www.huntingcamogear.com/content-categories/cat-198_221/ghillie_jackets.html Mon, 06 Feb 2012 01:30:01 -0600 en DescriptionDetailsPicturesPurchaseGhillie Suit Jacket Desert XL Model: G-BDU-J-Desert-XL SKU: DSD461104 MSRP: $192.00 Reseller Cost: $128.64 MAP Pricing? No # in Stock: 75 This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand http://www.huntingcamogear.com/content-product_info/product_id-2094/suit_jacket_desert_xl.html http://www.huntingcamogear.com/images/products/product_thumbCAL467QH.jpg http://www.huntingcamogear.com/content-product_info/product_id-2094/suit_jacket_desert_xl.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2395/jacket_synthetic_ultra_light_s_xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/jac woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2395/jacket_synthetic_ultra_light_s_xl_woodland_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2392/jacket_synthetic_ultra_light_s_xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac leafy green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2392/jacket_synthetic_ultra_light_s_xl_leafy_green_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2390/jacket_synthetic_ultra_light_s_xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2390/jacket_synthetic_ultra_light_s_xl_desert_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2394/jacket_synthetic_ultra_light_2_3xl_woodland_oak_ghillie.html http://www.huntingcamogear.com/images/products/jac woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2394/jacket_synthetic_ultra_light_2_3xl_woodland_oak_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to Military BDU pants. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the pants. The front of the pants have a 1000 Denier Cordura Plus sewn on. The Plus means it has a urethane coating making it water proof for laying down for extended periods. The 1000 Denier is very abrasive resistant, so you can crawl over rocks and sticks with ease. Top front and rear pockets are accessible. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight of Medium Large pants - 2 lbs. Boxed Weight 3 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2391/jacket_synthetic_ultra_light_2_3xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac leafy green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2391/jacket_synthetic_ultra_light_2_3xl_leafy_green_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2389/jacket_synthetic_ultra_light_2_3xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2389/jacket_synthetic_ultra_light_2_3xl_desert_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2425/jacket_synthetic_ultra_light_2_3xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2425/jacket_synthetic_ultra_light_2_3xl_woodland_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2424/jacket_synthetic_ultra_light_2_3xl_mossy_oak_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Mossy Oak.jpg http://www.huntingcamogear.com/content-product_info/product_id-2424/jacket_synthetic_ultra_light_2_3xl_mossy_oak_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2421/jacket_synthetic_ultra_light_2_3xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Leaft Green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2421/jacket_synthetic_ultra_light_2_3xl_leafy_green_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2419/jacket_synthetic_ultra_light_2_3xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2419/jacket_synthetic_ultra_light_2_3xl_desert_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2335/jacket_suit_woodland_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/jac wl.jpg http://www.huntingcamogear.com/content-product_info/product_id-2335/jacket_suit_woodland_s_xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2337/jacket_suit_woodland_3_4xl_ghillie.html http://www.huntingcamogear.com/images/products/jac wl.jpg http://www.huntingcamogear.com/content-product_info/product_id-2337/jacket_suit_woodland_3_4xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2336/jacket_suit_woodland_2xl_ghillie.html http://www.huntingcamogear.com/images/products/jac wl.jpg http://www.huntingcamogear.com/content-product_info/product_id-2336/jacket_suit_woodland_2xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2330/jacket_suit_leafy_green_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/jac leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2330/jacket_suit_leafy_green_s_xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2331/jacket_suit_leafy_green_2xl_ghillie.html http://www.huntingcamogear.com/images/products/jac leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2331/jacket_suit_leafy_green_2xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2327/jacket_suit_desert_s_xl_ghillie.html http://www.huntingcamogear.com/images/products/JAC DESERT.jpg http://www.huntingcamogear.com/content-product_info/product_id-2327/jacket_suit_desert_s_xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2329/jacket_suit_desert_3xl_4xl_ghillie.html http://www.huntingcamogear.com/images/products/JAC DESERT 3 & 4XL.jpg http://www.huntingcamogear.com/content-product_info/product_id-2329/jacket_suit_desert_3xl_4xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2328/jacket_suit_desert_2xl_ghillie.html http://www.huntingcamogear.com/images/products/jac desert xxl.jpg http://www.huntingcamogear.com/content-product_info/product_id-2328/jacket_suit_desert_2xl_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2426/jacket_sniper_synthetic_ultra_light_s_xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2426/jacket_sniper_synthetic_ultra_light_s_xl_woodland_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2423/jacket_sniper_synthetic_ultra_light_s_xl_mossy_oak_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Mossy Oak.jpg http://www.huntingcamogear.com/content-product_info/product_id-2423/jacket_sniper_synthetic_ultra_light_s_xl_mossy_oak_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2422/jacket_sniper_synthetic_ultra_light_s_xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper Leaft Green.jpg http://www.huntingcamogear.com/content-product_info/product_id-2422/jacket_sniper_synthetic_ultra_light_s_xl_leafy_green_ghillie.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire back of the jacket and sleeves, and has an attached hood. On the front of the jacket and sleeves, we sew a 1000 Denier Cordura Plus fabric. This allows you to slide and crawl on the ground over rocks and through mud with ease. The Cordura has a urethane coating which is water proof so you won't get wet while laying down for hours, or waiting for your prey. 1" wide Nylon straps are sewn to the inside of the sleeves as thumb loops, so when you're crawling, the sleeves wont ride up your arms. The front jacket buttons have been removed and Velcro has been sewn on so you won't feel the bumps when crawling. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves. All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant, Non-Allergenic and NO UV-Brighteners (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) http://www.huntingcamogear.com/content-product_info/product_id-2420/jacket_sniper_synthetic_ultra_light_s_xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/Jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2420/jacket_sniper_synthetic_ultra_light_s_xl_desert_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2376/jacket_sniper_suit_s_xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/JAC sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2376/jacket_sniper_suit_s_xl_woodland_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2373/jacket_sniper_suit_s_xl_mossey_oak_ghillie.html http://www.huntingcamogear.com/images/products/JC sniper Mossey.jpg http://www.huntingcamogear.com/content-product_info/product_id-2373/jacket_sniper_suit_s_xl_mossey_oak_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2370/jacket_sniper_suit_s_xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2370/jacket_sniper_suit_s_xl_leafy_green_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2367/jacket_sniper_suit_s_xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2367/jacket_sniper_suit_s_xl_desert_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2378/jacket_sniper_suit_3xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/JAC sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2378/jacket_sniper_suit_3xl_woodland_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Bran http://www.huntingcamogear.com/content-product_info/product_id-2375/jacket_sniper_suit_3xl_mossey_oad_ghillie.html http://www.huntingcamogear.com/images/products/JC sniper Mossey.jpg http://www.huntingcamogear.com/content-product_info/product_id-2375/jacket_sniper_suit_3xl_mossey_oad_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2372/jacket_sniper_suit_3xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2372/jacket_sniper_suit_3xl_leafy_green_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2369/jacket_sniper_suit_3xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2369/jacket_sniper_suit_3xl_desert_ghillie.html DescriptionDetailsPicturesPurchaseSniper Ghillie Suit Jacket Woodland XXL Model: S-BDU-J-Woodland-XXL SKU: DSD461061 MSRP: $210.00 Reseller Cost: $140.70 MAP Pricing? No # in Stock: 75 This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2377/jacket_sniper_suit_2xl_woodland_ghillie.html http://www.huntingcamogear.com/images/products/JAC sniper Woodland.jpg http://www.huntingcamogear.com/content-product_info/product_id-2377/jacket_sniper_suit_2xl_woodland_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2374/jacket_sniper_suit_2xl_mossey_oak_ghillie.html http://www.huntingcamogear.com/images/products/JC sniper Mossey.jpg http://www.huntingcamogear.com/content-product_info/product_id-2374/jacket_sniper_suit_2xl_mossey_oak_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2371/jacket_sniper_suit_2xl_leafy_green_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2371/jacket_sniper_suit_2xl_leafy_green_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire Back of the jacket tops of the arms and shoulders. The Hood is attached and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura Plus means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1x1 netting finally sewing this to the Jacket. This design keeps you cooler allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2368/jacket_sniper_suit_2xl_desert_ghillie.html http://www.huntingcamogear.com/images/products/jac sniper desert.jpg http://www.huntingcamogear.com/content-product_info/product_id-2368/jacket_sniper_suit_2xl_desert_ghillie.html This suit is pre-treated with a Class "A" fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by "Propper". The sewn on Jute thread covers the entire Back of the jacket, tops of the arms, and shoulders. The Hood is attached, and thumb loops are sewn into the cuff of the sleeves for crawling. The Front Chest area and the forearms have a 1000 Denier Cordura Plus material sewn on for those long Sniper crawls. The Cordura "Plus" means it has a Urethane Coating for water repellency. The Hood is built the same way we build our Ghillie Poncho - by hand tying the Jute thread to a 1"x1" netting, finally sewing this to the Jacket. This design keeps you cooler, allowing the wind to pass through and allows for better hearing. All the buttons on the chest have been removed, and Velcro has been sewn on to secure the jacket closed. This makes your crawl more comfortable without feeling the buttons ( Weight 6 lbs). If "Propper" brand is unavailable at the time, we will use "Tru-Spec" Brand. Multiple patterns and sizes available. Woodland pattern shown in main photo. SS Small-Short SR Small-Regular SL Small-Long BDU PANTS - Waist 27-31 27-31 27-31 BDU PANTS - Inseam 26 1/2-29 1/2 29 1/2-32 1/2 32 1/2-35 1/2 BDU COAT - Chest 33-37 33-37 33-37 BDU COAT - Height 63-67 67-71 71-75 -------------------------------------------------------------------------------- MS Medium-Short MR Medium-Regular ML Medium-Long BDU PANTS - Waist 31-35 31-35 31-35 BDU PANTS - Inseam 26 1/2-29 1/2 29 1/2-32 1/2 32 1/2-35 1/2 BDU COAT - Chest 37-41 37-41 37-41 BDU COAT - Height 63-67 67-71 71-75 -------------------------------------------------------------------------------- http://www.huntingcamogear.com/content-product_info/product_id-2366/jacket_sniper_suit_ghillie.html http://www.huntingcamogear.com/images/products/JAC DESERT.jpg http://www.huntingcamogear.com/content-product_info/product_id-2366/jacket_sniper_suit_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2334/138_69.html http://www.huntingcamogear.com/images/products/jck leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2334/138_69.html We use Industrial sewing machines to sew a knotted 1" x 1" nylon netting directly to a Military BDU 4 pocket coat. These are made by "ATLANCO". Our Synthetic thread is directly hand tied to this netting. The sewn on Synthetic thread covers the entire jacket in the front and the back, and has an attached hood. The Hood is build the same way we build our Ghillie Poncho by hand tying the thread to a 1"x1" netting, and then sewing this to the Jacket. This design allows you to stay cooler, allowing the wind to pass through, and also allows for better hearing. By using a netting on the outside of the BDU's, you can add natural vegetation while out in the field. This allows you to change your colors by adding sticks or leaves.All our Synthetic thread is Fire-retardant, Water-repellant, Rot Proof, Mildew resistant. Non-Allergenic and NO UV-Brighteners. (Actual weight for Medium Regular jacket - 3 lbs. Boxed Weight 4 lbs.) Jacket Only http://www.huntingcamogear.com/content-product_info/product_id-2393/jacket_synthetic_ultra_light_2_3xl_mossey_oak_ghillie.html http://www.huntingcamogear.com/images/products/jac mossey oak.jpg http://www.huntingcamogear.com/content-product_info/product_id-2393/jacket_synthetic_ultra_light_2_3xl_mossey_oak_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2333/jacket_suit_mossey_oak_2xl_ghillie.html http://www.huntingcamogear.com/images/products/jac l g.jpg http://www.huntingcamogear.com/content-product_info/product_id-2333/jacket_suit_mossey_oak_2xl_ghillie.html This suit is pre-treated with a Class A fire-retardant Our same High Quality Jute Thread is sewn directly on to a Military BDU 4 pocket coat. These are made by Propper. The sewn on Jute thread covers the entire jacket in the front and the back and has an attached hood. The Hood is built the same way we build our Ghillie Poncho by hand tying the Jute thread to a 1x1 netting and then sewing this to the Jacket. This design allows you to stay cooler allowing the wind to pass through and also allows for better hearing. (Weight 6 lbs.) If Propper brand is unavailable at the time we will use Tru-Spec Brand. http://www.huntingcamogear.com/content-product_info/product_id-2332/jacket_suit_leafy_green_xxxl_ghillie.html http://www.huntingcamogear.com/images/products/jac leafy.jpg http://www.huntingcamogear.com/content-product_info/product_id-2332/jacket_suit_leafy_green_xxxl_ghillie.html